Voltage: 12-24VDC±10%
Sensing distance: 30mm-40m
Output type: Switching+485
| NPN | PF72-S40N-485 |
| PNP | PF72-S40P-485 |
Product Image
Industry Experience
R&D Team
Core Technology
Cooperating Customers
| Sensing distance | 30mm-40m |
| Measuring accuracy | ±(2mm+0.01%F.S) |
| Repeat accuracy | ±2.5mm |
| Resolution | 1mm |
| Response frequency | 60ms (30ms-100ms) |
| Switching output | NPN, PNP optional |
| Detection mode | Dual switching output(signal output+fault alarm); 4 detection modes optional |
| Communication method | RS485(SUPPORT MULTI-SITE OUTPUT) |
| Power supply voltage | 12-24VDC Pluse±10% |
| Consumption current | 50mA below@24VDC |
| Load current | ≤150mA |
| Circuit protection | Self-recovering short-circuit protection |
| Laser spot | Approximately 8mm(measured at a distance of 10 meters) |
| Laser source | Red laser, 660±15nm; Laser power: less than 1mW |
| Laser class | Secondary laser IEC 60825-1:2014, EN60825-1:2014 |
| Measured object | Non-transparent body: natural object/reflective film |
| Connection method | M12Aviation connector-6PIN |
| Insulation strength | Above 100MΩ(megohmmeter DC500V), between all power terminals and the housing |
| Operating temperature/humidity | -10℃-+50℃(avoid condensation and freezing)/35%-85%RH |
| Storage temperature | -25℃-+75℃ |
| Ambient light | Lighting level of the illuminated surface, sunlight: 10000 lux; incandescent light: below 3000 lux |
| Housing material | zinc alloy |
| Weight | 50g(cable not included) |
| IP rating | IP54 |
| Product dimensions | 42×59×30mm |